Input |
1 x 3G-SDI on BNC, SMPTE292 / 75 Ohms |
Output |
1 x 3G-SDI on BNC, Active Loop Out, SMPTE292 / 75 Ohms |
Supported Input Formats |
1080p/59.94/50 (Level-A Support Only) 1080p/23.98/25 1080PsF/23.98/25 1080i/59.94/50 |
IP Control |
1 x RJ-45 100BASE‚ÄëTX PoE+ Input Max LAN Cable Length Supported: 328' / 100 m |
Serial Control |
5 x RJ-45 (RS-422, Tally Out) Max Cable Length Supported: 3280' / 1000 m (Cat 5e or Higher Shielded Cable)
Tally Out: Open Collector Output (Negative Logic) 24 VDC Maximum Voltage Resistance, 50 mA Maximum Current |
Tally/GPIO 1 |
1 x 25-Pin D-Sub Tally In: 10 Inputs (for Photocoupler Signals) GPI: 6 Inputs (for Photocoupler Signals) GPIO: 5 Inputs (for Photocoupler Signals) or 5 Outputs (Open Collector Outputs, Negative Logic) |
GPIO 2 |
1 x 25-Pin D-Sub GPI: 10 Inputs (for Photocoupler Signals) GPIO: 10 Inputs (for Photocoupler Signals) or 10 Outputs (Open Collector Outputs, Negative Logic) |
LCD Display |
7" Touch Panel GUI Monitor 800 x 480 (WVGA) Resolution |
Memory Card Slot |
1 x SD Card Slot (SDHC/SDXC) |
Number of Cameras Supported |
200 (IP), 5 (RS-422) |
Camera Selection Buttons |
10 |
Camera Groups |
20 (10 Units per 1 Group) |
Tracing Memory |
Cam1 to Cam10 5-Minute Recording Time per Camera 10 Memory Settings per Camera |
User Assignable Buttons |
6 (Plus 10 on the LCD Menu) |
Pan / Tilt Adjustment |
7 Speed Levels |
Tally LED Indicator |
Green / Red |
Power Input |
12 VDC, 4-Pin XLR |
Power Requirements |
12 VDC (10.8 to 13.2 V) |
PoE+ |
IEEE802.3at Standard: 42 to 57 VDC (Camera Input) |
Current Consumption |
1.0 A (Connector Input) 0.6 A (PoE+ Power Supply) |
Operating Temperature |
32 to 104°F / 0 to 40°C |
Relative Humidity |
20 to 90% (No Condensation) |
Storage Temperature |
-4 to 122°F / -20 to 50°C |
Dimensions |
13.5 x 7 x 9.6" / 34.2 x 17.8 x 24.5 cm (Excluding Protrusions) |
Weight |
Approx 7 lb / 3.2 kg |